Each of these helmets will give you hands-free
visor operation. Think of the time you could save if you didn't have to
raise and lower your welding helmet by hand before each weld. With the
Accu-Strike welding helmet, you can keep both hands on your work--and operate
your visor just by raising and lowering your jaw. (1/4" or less) Less
body movement means fewer missed strikes and faster, more productive welding.
You can see your work clearly without raising the entire helmet. You get
a clean, accurate strike the first time. And if you weld in tight spots
or in high places, the Accu-Strike helmet can not only save time--it can
help you prevent injury.
Depending upon you situation, welding speed can
double using the Accu- Strike helmet. At that rate, the helmet will pay
for itself in a matter of days!
Since the helmet stays down while you're working, side flash
problems are virtually eliminated. Only the visor flips up and
down--giving a welder a clear view of the weld without being subjected
to the arcs of co-workers nearby.
There are now over 100,000 helmets sold, and
they are being used in bodyshops, tool & die, ornamental Iron shops,
repair shops, muffler shops, construction, etc. If you can use a free hand
while welding then try this helmet!
Construction:
The Accu-Strike helmet is formed of a high
strength polycarbonate--lightweight yet strong and durable. It can be worn
comfortably all day with little or no fatigue.
The visor contains a 3" x 5 1/4"
polycarbonate shaded lens shielded by a clear polycarbonate lens. Behind these
replaceable lenses is another replaceable lens of clear impact-resistant
polycarbonate for protection while chipping or grinding. The view window is large
enough to be used easily by bifocal wearers.
How it Works:
The chin strap operates the visor. Lower the
jaw slightly and open the visor effortlessly! The amount of jaw movement
controls the amount of opening. Release chin pressure and the visor closes
in place. Visor can also be locked open for grinding or extended viewing.
A slight (adjustable) nod of the head closes the visor.
The Accu-Strike helmet is fully adjustable
to fit all welders. Comfort, accuracy, speed, and safety are good reasons
to buy the Accu-Strike welding helmet. Your satisfaction is guaranteed.
Meets A.N.S.I. standards.
(Important safety
information regarding
lenses: The Accu-Strike helmet is inspected
as a welding helmet and safety shield. It is very important to use Cherokee
brand replacement lenses. There are a few companies selling cast resin
lenses that will break on impact, so please ask for Cherokee Lenses or
order them from our online order form.)
Our Products Carry a Two Year Warranty!
Click here for the
or email to helmets@accustrike.com Cherokee Industries
1105 G St.
Ord, NE 68862
Ph. 800-658-4443
or 308-728-3113
Fax 308-728-3481
Fed. I.D. # 47-0715475
Back to Cherokee Industries Home
Page
Copyright Cathy Bruha 1996